Add products by adding codes
Tempered Glass 5D UV MOTOROLA MOTO EDGE 50 FUSION 5G / EDGE 50 PRO 5G Hofi UV Glass Pro+ 2-pack
Hofi UV Glass Pro+ tempered glass protects a significant part of the rounded screen, has a surface hardness of 9H, which is why it is extremely resistant to scratches even when in contact with sharp objects, and additionally, it is covered with an oleophobic coating that reduces the number of fingerprints.
The UV model is glued using a liquid substance on the entire screen surface, and then the substance is hardened using a UV lamp.
Thanks to this combination, we obtain the perfect effect of smoothness, clarity and responsiveness.
Installation is easy and user-friendly
Check how to install: https://www.youtube. com/watch?v=W7uxROE7ywk&feature=youtu.be
* We do not recommend using 3D glass without any casing.
** We do not recommend using glass if the casing overlaps the edges of the screen too much, there is a risk of prying it off.
*** The functionality of the fingerprint reader on the screen may be slightly disturbed in the case of an installed coating in the form of foil or glass. The fingerprint reader is not fully developed for additional coatings.
INSTALLATION INSTRUCTIONS:
1) Start the installation in the bathroom right after taking a bath - the water vapor will absorb all the dust from the atmosphere and it will not interfere with the installation.
2) Clean thoroughly and degrease the screen surface, and then use a dry cloth to polish it to a shine.
3) Cover the speaker with the tape from the set.
4) Connect the UV lamp using a Type-C cable to the power source.
/>5) Pour the liquid into the very center of the device.
6) Install the glass as smoothly as you can, you can also correct this stage before the surface hardens, when the liquid is on the screen along with the glass.
7) If an air bubble appears, use an ATM card and gently push it outside the glass, we do this before hardening.
8) Using a UV lamp, harden the glass along the center in five places for 15 seconds and then around the edges for 10 seconds .
9) Clean the phone from the remains of hardened glue.
10) If your device has a fingerprint reader on the screen, remember to remove and re-add the fingerprints after installing the glass on the screen.
11 ) Enjoy a job well done!
PRODUCT FEATURES:
- 100% Original
- Packed in original packaging
- 0.3mm thick tempered glass
- Scratch resistance 9H
- Equipped with an oleophobic coating
- Leaves no trace after disassembly
- Dimensions: 157x72mm
SET CONTAINS:
2 x Hofi UV Pro+ Glass
1 x UV lamp (without Type-C cable)
2 x Tube of glue
2 x Installation kit
